Door Rev distinguishes between a film's fire-performance characteristics and the certification of a complete fire-door assembly, and treats accessibility, egress, labels, hardware and life-safety information as part of the project review.
Architectural films can have their own test classifications. That does not automatically prove that applying a film to an existing rated door preserves the rating of the complete assembly.
UL Solutions has specifically cautioned that aftermarket wraps or claddings can affect certified fire-door assemblies and that surface-burning testing alone does not establish fire-door compliance.
Door Rev does not treat one test result as a substitute for another.
These methods evaluate surface-burning characteristics of a material under specified test conditions. A favorable result can be relevant to an architectural film, but it does not by itself certify a finished fire-door assembly.
These standards address fire tests of door assemblies. A labeled door's compliance depends on the complete assembly, its listing and the conditions under which it was evaluated.
UL also maintains certification categories for certain cladding materials evaluated for fire doors and frames. That can create a documented path for a specific product and application, but the individual certification scope and limitations control. It is not blanket permission to wrap every rated door.
For labeled fire doors, the selected material, substrate, application method, labels, hardware and assembly requirements must be checked before installation. Where required, the manufacturer, listing agency or authority having jurisdiction should confirm the proposed application.
Door treatments are planned around required signage, egress information, vision panels, labels and operable hardware. Under the 2010 ADA Standards, many permanent-room tactile signs are located adjacent to a door at the latch side; actual property conditions still need to be checked before creative is approved.
Do not cover or visually compete with required tactile/Braille, exit, room-identification or other regulated signage. Verify the actual sign location and contrast requirements for the property.
In workplaces covered by OSHA, an exit-route door must remain free of decorations or signs that obscure its visibility. Door Rev treats exit-route recognition as a safety constraint, not a creative opportunity, and requires property/code review before any treatment near required egress identification.
Creative and film installation must not interfere with closers, locks, exit devices, viewers, hinges, clearances or normal closing/latching behavior.
Keep required glazing, vision panels, labels, warning markings and life-safety information unobstructed unless the exact project documentation expressly allows otherwise.
Accessibility reference: 2010 ADA Standards for Accessible Design, including sections 216 and 703 for applicable signage.
Material, finish condition, damage, coatings, edges, prior repairs and suitability for adhesion.
Known rating, certification labels, hardware, clearances and other assembly considerations. Required labels remain visible and accessible.
Manufacturer, exact product code, adhesive or primer requirements, technical data, warranty conditions, any applicable certification scope and application limitations.
Surface preparation, seams, edges, hardware transitions, heat use and finishing techniques are matched to the selected product and substrate.
Do not rely on a generic “Class A” or “fire-rated film” claim. Confirm whether the exact proposed material and application are permitted for the exact labeled assembly and project conditions.
Document the door, selected material, installation scope and the project-specific manufacturer, listing/certification or authority guidance used to approve the work.
Installation requirements vary by product and substrate. Door Rev follows the applicable manufacturer's current technical and installation instructions. For DI-NOC projects, use the current 3M DI-NOC Architectural Finishes Installation Guide; the version reviewed for this site is Revision M, February 2026.
Our standard is simple: confirm the door, substrate, exact material, labels, assembly requirements, accessibility and egress conditions, and application method before the work begins.